Luxul XMS-1024P - Manual (Page 73)

73
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
The following entries are displayed on this screen:
VLAN Table
MAC Address: Enter the MAC address.
Description: Give a description to the MAC address for identification.
VLAN ID: Enter the VLAN ID of the MAC VLAN. This VLAN should be one of the
802.1Q VLANs the Ingress Port belongs to.
MAC VLAN Table
MAC Select:
Click the Select button to quick-select the corresponding.
Select: Select the desired entry(ies).
MAC Address: Displays the MAC address.
Description: Displays the user-defined description of the MAC address.
VLAN ID: Displays the corresponding VLAN ID of the MAC address.
Operation: Click the Edit button to modify the settings of the entry, then click the
Modify button to apply your changes.
Configuration Procedure:
Step Operation Description
1 Set the desired link type of
the Port. On the VLAN>>802.1Q VLAN>>Port Config page, set the
link type for the Port based on its connected device.
Options include Access, Trunk and General.
2 Create a VLAN. On the VLAN>>802.1Q VLAN>>VLAN Config page,
click the Create button to create a VLAN. Enter the
VLAN ID, the description for the VLAN and specify its
member Ports.
3 Create MAC VLAN. On the VLAN>>MAC VLAN page, create the MAC
VLAN device entry(ies). For device(s) in a MAC VLAN,
it is required that the Port of Switch the device(s) are
connected too, be a member of the VLAN ID created
for the MAC VLAN to ensure normal communication.
CAUTION: MAC VLAN settings will be restored to defaults if the Switch
is restarted and you have not selected Save Config from the
main menu and saved your running configuration to non-
volatile memory.