Luxul XMS-1024P - Manual (Page 124)

124
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Choose the menu Multicast>>IGMP Snooping>>VLAN Confi g to load the
following page.
Figure 8-6 VLAN IGMP Confi g
The following entries are displayed on this screen:
VLAN Confi g
VLAN ID: Enter the VLAN ID to enable IGMP Snooping for the desired VLAN.
Router Port Time: Specify the Aging Time of the Router Port (Multicast Server). If the
Switch does not receive an IGMP Query Message from the Router Port
before the Aging Time elapses, it will no longer consider this Port a
Router Port. Default value is 300 seconds.
Member Port Time: Specify the Aging Time of the member Port. If the Switch doesn’t
receive an IGMP Report Message from the member Port before the
Aging Time elapses, it will no longer consider this Port a Member Port.
Default value is 260 seconds.
Leave Time: Specify the interval between the Switch receiving a Leave Message
from a client device and the Switch removing the client device from
the Multicast Group. Default value is 1 second.
Static Router Port: Select a static Router Port (Multicast Server), used in a Network with
stable topology and defi ned Multicast Servers.
VLAN Table
VLAN ID Select:
Click the Select button to quick-select the corresponding VLAN ID.
Select: Select the desired VLAN ID(s) for confi guration.