User guide, 1 diffserv – Luxul XMS-1024P User Manual
Page 141
141
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
9.1 DiffServ
This Switch Classifi es Ingress packets, Maps the packets to the corresponding Priority
Queues and then Forwards the packets according to specifi ed Scheduling Algorithms.
This Switch implements three Priority Modes based on: Port, 802.1P and DSCP, and sup-
ports four Queue Scheduling Algorithms. The Port priorities are labeled as CoS0-CoS7.
The DiffServ function can be implemented on
CoS Port Priority, DSCP Priority, CoS/
TC Queue Mapping and Priority Schedule Mode pages.
9.1.1 CoS Port Priority
On this page you can confi gure the Port priority.
Choose the menu
QoS>>DiffServ>>Port Priority to load the following page.
Figure 9-6 CoS Port Priority
The following entries are displayed on this screen:
Port Priority Confi g
Select:
Select the desired Port(s) to confi gure the priority.
Port:
Displays the Port number of the Switch.
Priority:
Specifi es the priority of the Port.
LAG:
Displays the LAG Group to which the Port belongs.