Luxul XMS-1024P - Manual (Page 64)

64
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
The following entries are displayed on this screen:
Add MAC Address Filter
MAC Address: Enter the MAC Address to be filtered.
VLAN ID: Enter the corresponding VLAN ID of the MAC address.
Search Option
Search Option:
Select a Search Option from the drop-down and click the Search button to
find your desired entry in the MAC Filter Table.
„
MAC: Enter the MAC address the desired entry.
„
VLAN ID: Enter the VLAN ID number the desired entry/entries.
MAC Filter Table
Select:
Select the entry/entries to delete the corresponding MAC Filter(s).
MAC Address: Displays the Filtered MAC Address.
VLAN ID: Displays the corresponding VLAN ID.
Port: Displays the Port number, blank indicates no specified Port.
Type: Displays the Type of the MAC address.
Aging Status: Displays the Aging Status of the MAC address.
CAUTION: MAC Filtering settings will be restored to defaults if the
Switch is restarted and you have not selected Save Config
from the main menu and saved your running configuration to
non-volatile memory.
NOTE: MAC Address(es) in the MAC Filter Table cannot be added to the
Static MAC Table or be bound to a Port dynamically.
NOTE: MAC Filtering is not available if 802.1X/RADIUS/RADIUS is enabled.
6 VLAN
Virtual Local Area Network (VLAN) is a Network topology configured in logical scheme
rather than a physical layout. VLAN technology was developed as a way for Switches
to control broadcast in load in the Local Area Network (LAN). By creating VLANs in a
physical LAN, you can divide the LAN into multiple logical LANs, each of which has a
broadcast domain of its own. Hosts in the same VLAN communicate with one another