Luxul XMS-1024P - Manual (Page 60)

60
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
The following entries are displayed on this screen:
Add Static MAC
MAC Address: Enter the static MAC Address to be bound.
VLAN ID: Enter the corresponding VLAN ID of the MAC address.
Port: Select a Port from the drop-down to be bound.
Search Option
Search Option: Select a Search Option from the drop-down and click the Search button to
find the desired entry in the Static MAC Table.
„ MAC: Enter the MAC address of the desired entry.
„ VLAN ID: Enter the VLAN ID number of the desired entry/entries.
„ Port: Enter the Port number of the desired entry/entries.
Static MAC Table
Select:
Select an entry to delete or modify the corresponding Port number.
MAC Address: Displays the Static MAC Address.
VLAN ID: Displays the corresponding VLAN ID of the Static MAC Address.
Port: Displays the corresponding Port Number of the Static MAC Address. You can
modify the Port number to which the MAC Address is bound, however the
new Port must be in the same VLAN.
Type: Displays the Type of the MAC Address entry.
Aging Status: Displays the Aging Status of the MAC Address entry.
CAUTION: Static MAC settings will be restored to defaults if the Switch
is restarted and you have not selected Save Config from the
main menu and saved your running configuration to non-
volatile memory.
CAUTION: If the corresponding Port Number of the Static MAC address
is not correct due to the connected Port or device having
changed, the Switch will not forward packets correctly. Please
reset the static address entry correctly.
CAUTION: If the MAC address of a device has been added to the Static MAC
Table, connecting the device to another Port will cause its MAC
Address not to be recognized dynamically by the Switch. This
will result in packets not forwarding to the connected device.