Luxul XMS-1024P - Manual (Page 112)

112
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Step Operation Description
1 Configure Ports On VLAN>>802.1Q VLAN page, configure the link type
of the interconnect Ports as Trunk, and add the Ports
to VLAN 101-VLAN 106. Detailed instructions can be
found in the section 802.1Q VLAN.
2 Enable STP function On Spanning Tree>>STP Config>>STP Config page,
enable STP function and select MSTP as your STP
version.
On Spanning Tree>>Port STP Config>>Port Config
page, enable STP on all Ports.
3 Configure the Region Name
and the Revision of the
MST Region On Spanning Tree>>MSTP Instance>>Region Config
page, configure the region as LUXUL and keep the
default revision setting.
4 Configure VLAN-to-
Instance mapping table of
the MST region On Spanning Tree>>MSTP Instance>>Instance Config
page, configure VLAN-to-Instance mapping table. Map
VLAN 101, 103 and 105 to Instance 1. Then map VLAN
102, 104 and 106 to Instance 2.
„
Configure Switch B:
Step Operation Description
1 Configure Ports On VLAN>>802.1Q VLAN page, configure the link type
of the interconnect Ports as Trunk, and add the Ports
to VLAN 101-VLAN 106. Detailed instructions can be
found in the section 802.1Q VLAN.
2 Enable STP function On Spanning Tree>>STP Config>>STP Config page,
enable STP function and select MSTP as your
STP version.
On Spanning Tree>>Port STP Config>>Port Config
page, enable STP on all Ports.
3 Configure the Region Name
and the Revision of the MST
Region On Spanning Tree>>MSTP Instance>>Region Config
page, configure the region as LUXUL and keep the
default revision setting.
4 Configure VLAN-to-Instance
mapping table of the MST
region On Spanning Tree>>MSTP Instance>>Instance Config
page, configure VLAN-to-Instance mapping table. Map
VLAN 101, 103 and 105 to Instance 1. Then map VLAN
102, 104 and 106 to Instance 2.
5 Configure Switch B as the
Root Bridge of Instance 1 On Spanning Tree>>MSTP Instance>>Instance Config
page, configure the priority of Instance 1 to be 0.