Luxul XMS-1024P - Manual (Page 46)

46
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
NOTE: Port Isolations settings will be restored to defaults if the
Switch is restarted and you have not selected Save Confi g
from the main menu and saved your running confi guration to
non-volatile memory.
5.1.5 Loopback Detection
The Loopback Detection feature can detect Network loops using loopback detection
packets. When a loop is detected, the Switch will display an alert and/or block the
corresponding Port according to the settings confi gured.
Choose the menu Switching>>Port Settings>>Loopback Detection to load the
following page.
Figure 5-6 Loopback Detection Confi g
The following entries are displayed on this screen: