Luxul XMS-1024P - Manual (Page 42)

42
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
The following entries are displayed on this screen.
Mirror Group
Number: The mirror group number you want to configure.
Mirroring Port
Mirroring Port:
The Mirroring Port (destination Port) number.
Mirrored Port
Port Select:
Enter a Port number and click the Select button to quick-select the
corresponding Port.
Select: Place a check in the check box to select the desired Port(s) as a
Mirrored Port (source Port(s)).
Port: Displays the Port number.
Ingress: Enable or Disable the Ingress feature. When Ingress is enabled the
incoming packets received by the Mirrored Port will be copied and
forwarded to the Mirroring Port.
Egress: Enable or Disable the Egress feature. When Egress is enabled the
outgoing packets received by the Mirrored Port will be copied and
forwarded to the Mirroring Port
LAG: Displays the LAG Group number the Port belongs to. A LAG Group
member cannot be selected as a Mirrored Port or Mirroring Port.
CAUTION: Port Mirror settings will be restored to defaults if the Switch
is restarted and you have not selected Save Config from the
main menu and saved your running configuration to non-
volatile memory.
NOTE: LAG Group members cannot be selected as a Mirrored Port or
Mirroring Port.
CAUTION: A Port cannot be set as a Mirrored Port and a Mirroring
Port simultaneously.
NOTE: The Port Mirror function will span multiple VLANs.