User guide – Luxul XMS-1024P User Manual
Page 191
191
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
Choose the menu
Network Security>>IP-MAC Binding>>ARP IP-MAC Binding to load
the following page:
Figure 12-4 ARP Scanning
The following entries are displayed on this screen:
Scanning Confi g
Start IP Address:
Specify the Starting IP Address.
End IP Address:
Specify the Ending IP Address.
VLAN ID:
Enter the VLAN ID. If left blank, the Switch will send the untagged packets
when scanning.
Scan:
Click the Scan button to Scan the Hosts in the LAN.
Scanning Result
Select:
Select the desired Entry to be Bound or Deleted.
Host Name:
Displays the Host Name.
IP Address:
Displays the IP Address of the Host.
MAC Address:
Displays the MAC Address of the Host.
VLAN ID:
Displays the VLAN ID.
Port:
Displays the Port Number connected to the Host.
Protect Type:
Displays the Protect Type of the Entry.
Collision:
Displays the Collision status of the Entry.
Warning: Indicates that a collision may be caused by the MSTP function.
Critical: Indicates that the Entry has caused a collision with
other Entries.