Luxul XMS-1024P - Manual (Page 71)

71
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
Choose the menu VLAN>>802.1Q VLAN>>Port Confi g to load the following page.
Figure 6-5 Port VLAN Confi g
The following entries are displayed on this screen:
VLAN Confi g
Port Select: Click the Select button to quick-select the corresponding entry based on the
Port number entered.
Select: Select the desired Port(s) for confi guration.
Port: Displays the Port number.
Link Type: Select the Link Type from the pull-down list for the Port.
„
ACCESS: can only be added to a single VLAN, the Egress Rule of the Port
is UNTAG. The PVID is same as the current VLAN ID. If the current VLAN is
deleted the PVID will be set back to VLAN ID 1.
„
TRUNK: can be added to multiple VLANs, the Egress Rule of the Port is
TAG. The PVID can be set as the PVID of any VLAN the Port belongs to, this
will also be the PVID used if an Untagged packet is forwarded by the port.
„
GENERAL: can be added to multiple VLANs, various Egress tagging Rules
can be applied to the different VLANs the port is a member of. The default
Egress Rule is UNTAG. The PVID can be set as the PVID of any VLAN the
Port belongs to and if set to TAG will be added to any Untagged packets
forwarded by the port.
PVID: Enter the PVID number of the Port.
LAG: Displays the LAG Group the Port belongs to.
VLAN: Click the Details link to view the information of the VLAN the Port belongs to.