Luxul XMS-1024P - Manual (Page 238)

238
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
The following entries are displayed on this screen:
Alarm Table
Select: Select the desired Entry to configure.
Index: Displays the Index number of the Entry.
Variable: Select the Alarm Variable from the dropdown list.
Port: Select the Port to which the Alarm Entry is associated.
Sample Type: Specify the Sampling method for the selected Variable.
„
Absolute: Compares the values directly with the Thresholds at the end
of the Sampling Interval.
„
Delta: Subtracts the last Sampled Value from the current Value. The
difference in the Values is compared to the Threshold.
Rising Threshold: Enter the Rising Value that triggers the Rising Threshold alarm.
Rising Event: Select the Index of the corresponding Event which will be triggered if the
Sampled Value is larger than the Rising Threshold.
Falling Threshold: Enter the Falling Value that triggers the Falling Threshold alarm.
Falling Event:
Select the Index of the corresponding Event which will be triggered if the
Sampled Value is lower than the Falling Threshold.
Alarm Type: Specify the Type of Alarm.
„ All: The Alarm Event will be triggered if either the Sampled Value
exceeds the Rising Threshold or is less than the Falling Threshold.
„ Rising: When the Sampled Value exceeds the Rising Threshold the Alarm
event is triggered.
„ Falling: When the Sampled Value is less than the Falling Threshold the
Alarm event is triggered.
Interval: Enter the Alarm Interval time in seconds.
Owner: Enter the Name of the Device or User defined in the Entry.
Status: Enable/Disable the corresponding Alarm Entry.
CAUTION: Alarm Config settings will be restored to defaults if the Switch
is restarted and you have not selected Save Config from the
main menu and saved your running configuration to non-
volatile memory.