Luxul XMS-1024P - Manual (Page 44)

44
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
The following entries are displayed on this screen:
Port Security
Select: Check the check box of the desire Port(s) for Port
Security configuration.
Port: Displays the Port number.
Max Learned MAC: Specify the Maximum number of MAC Addresses that can be learned
on the Port(s).
Learned Num: Displays the number of MAC Addresses that have been learned by
the Port.
Learn Mode: Select the Learn Mode for the Port.
„
Dynamic: When Dynamic mode is selected any learned MAC
Address will be deleted automatically after the aging time expires.
„
Static: When Static mode is selected the learned MAC Address
will not be deleted by the aging time process and can only be
deleted manually. The learned entries will clear if the Switch
is rebooted.
„
Permanent: When Permanent mode is selected the learned MAC
Address will not be deleted by the aging time process and can
only be deleted manually. The learned entries will be saved if the
Switch is rebooted.
Status: Enable or Disable the Port Security feature for the Port(s).
CAUTION: Port Security settings will be restored to defaults if the
Switch is restarted and you have not selected Save Config
from the main menu and saved your running configuration
to non-volatile memory.
CAUTION: Port Security is unavailable for any LAG Group members. If the
Port is removed from the LAG Group the Port Security function
will be available for the Port.
NOTE: Port Security is disabled when using 802.1X/RADIUS/Radius
Authentication.
5.1.4 Port Isolation
Port Isolation (sometimes referred to as Port based VLAN) provides a method of
restricting traffic flow and to improve Network security. By not allowing the selected