Luxul XMS-1024P - Manual (Page 216)

216
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
The following entries are displayed on this screen:
802.1X Config
802.1X: Enable/Disable the 802.1X function.
Authentication
Method: Select the Authentication Method from the pull-down list.
„
EAP-MD5: IEEE 802.1X/RADIUS Authentication system uses extensible
Authentication protocol (EAP) to exchange information between the
Switch and the client. The EAP protocol packets with Authentication Data
can be encapsulated in advanced protocol packets to be transmitted to
the Authentication Server.
„
PAP: IEEE 802.1X/RADIUS Authentication system uses extensible
Authentication protocol (EAP) to exchange information between the
Switch and the client. The transmission of EAP packets are terminated
at the Switch and the EAP packets are converted to another protocol
for transmission.
Guest VLAN: Enable/Disable the Guest VLAN feature.
Guest VLAN ID: Enter your desired VLAN ID to enable the Guest VLAN feature. The
Supplicants in the Guest VLAN can access only the specified
Network resources.
Authentication Config
Quiet:
Enable/Disable the Quiet timer.
Quiet Period: Specify a value for Quiet Period. When the Supplicant fails 802.1X/RADIUS
Authentication the Switch will stop responding to Authentication Requests
from the same Supplicant during the Quiet Period.
Retry Times: Specify the maximum number of times to allow Authentication
Request retries.
Supplicant
Timeout: Specify the maximum time for the Switch to wait for a response from the
Supplicant before resending a request to the Supplicant.
Server
Timeout: Specify the maximum time for the Switch to wait for a response from
the Authentication Server before resending a request to the
Authentication Server.
CAUTION: 802.1X Config settings will be restored to defaults if the
Switch is restarted and you have not selected Save Config
from the main menu and saved your running configuration to
non-volatile memory.