Altera Internal Memory (RAM and ROM) IP Core - Manual (Page 44)

Parameter Legal Values Description
Use different data widths on different ports On/Off Specifies whether to use
different data widths on
different ports.
How wide should the ‘q_a’ output bus be?
—
Specifies the width of the ‘q_
a’ and ‘q_b’ output ports.
How wide should the ‘q_b’ output bus be?
What should the memory block type be?
Auto, M4K, M9K,
M144K, M10K,
M20K, MLAB
Specifies the memory block
type. The types of memory
block that are available for
selection depends on your
target device
Set the maximum block depth to Auto, 128, 256, 512,
1024, 2048, 4096
Specifies the maximum block
depth in words. This option
is enabled only when you
choose Auto as the memory
block type.
Parameter Settings: Clks/Rd, Byte En
UG-01068
2014.12.17
ROM: 2-PORT IP Core Parameters 4-19
Embedded Memory Signals and Parameters Altera Corporation
Send Feedback