Document revision history – Altera Internal Memory (RAM and ROM) IP Core User Manual

Page 56

Advertising
background image

Document Revision History

A

2014.12.17

UG-01068

Subscribe

Send Feedback

Document Revision History

This table lists the document revision history for the user guide.

Table A-1: Document Revision History

Date

Version

Changes

December 2014

2014.12.17

• Specified that to enable byte enable for port A and port

B, the data width ratio has to be 1 or 2 for the RAM: 1-

PORT and RAM: 2-PORT IP cores.

• Updated document template.

2014.06.30

5.0

• Replaced MegaWizard Plug-In Manager information

with IP Catalog.

• Added standard information about upgrading IP cores.

• Added standard installation and licensing information.

• Removed outdated device support level information. IP

core device support is now available in IP Catalog and

parameter editor.

• Removed all references to obsolete SOPC Builder tool.

May 2014

4.4

Editorial fix to Table 4–1 on page 4–5.

November 2013

4.3

Updated Table 3–8 on page 3–18 to update M20K block

information.

May 2013

4.2

Updated Table 3–4 on page 3–11 to fix a typographical

error.

©

2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are

trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at

www.altera.com/common/legal.html

. Altera warrants performance

of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any

products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,

product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device

specifications before relying on any published information and before placing orders for products or services.

ISO

9001:2008

Registered

www.altera.com

101 Innovation Drive, San Jose, CA 95134

Advertising