Altera Stratix IV E FPGA Development Board - Manual (Page 9)

May 2011 Altera Corporation Stratix IV E FPGA Development Board Reference Manual
2. Board Components
Introduction
This chapter introduces the major components on the Stratix IV E FPGA development
board.
Figure 2–1 illustrates major component locations and Table 2–1 provides a brief
description of all component features of the board.
1 A complete set of schematics, a physical layout database, and GERBER files for the
development board reside in the Stratix IV E FPGA development kit documents
directory.
f For information about powering up the board and installing the demonstration
software, refer to the
Stratix IV E FPGA Development Kit User Guide .
This chapter consists of the following sections:
■ “Board Overview”
■ “Featured Device: Stratix IV E Device” on page 2–5
■ “MAX II CPLD EPM2210 System Controller” on page 2–7
■ “Configuration, Status, and Setup Elements” on page 2–12
■ “Clock Circuitry” on page 2–22
■ “General User Input/Output” on page 2–24
■ “Components and Interfaces” on page 2–31
■ “Memory” on page 2–42
■ “Power Supply” on page 2–57
■ “Statement of China-RoHS Compliance” on page 2–60