Altera Cyclone IV GX FPGA Development Board - Manual (Page 31)

Chapter 2: Board Components 2–23
General User Input/Output
May 2013 Altera Corporation Cyclone IV GX FPGA Development Board
Reference Manual
Table 2–22 lists the HSMC user-defined LED schematic signal names and their
corresponding Cyclone IV GX pin numbers.
Table 2–23 lists the HSMC user-defined LED component reference and the
manufacturing information.
User-Defined DIP Switch
Board reference SW2 is an 8-pin DIP switch. The switch is user-defined, and is
provided for additional FPGA input control. There is no board-specific function for
this switch.
Table 2–24 lists the user-defined DIP switch schematic signal names and their
corresponding Cyclone IV GX pin numbers.
Table 2–22. HSMC User-Defined LED Schematic Signal Names and Functions
Board Reference Description
Schematic
Signal Name
I/O Standard
Cyclone IV GX Device
Pin Number
D4
User-Defined LEDs.
Labeled RX for HSMC Port A.
HSMA_RX_LED
2.5-V
C24
D3
User-Defined LEDs.
Labeled TX for HSMC Port A.
HSMA_TX_LED B25
D6
User-Defined LEDs.
Labeled RX for HSMC Port B.
HSMB_RX_LED C10
D5
User-Defined LEDs.
Labeled TX for HSMC Port B.
HSMB_TX_LED D25
Table 2–23. HSMC User-Defined LED Component Reference and Manufacturing Information
Board Reference Device Description Manufacturer Manufacturer Part Number Manufacturer Website
D3–D6 Green LEDs Lumex, Inc. SML-LXT0805GW-TR www.lumex.com
Table 2–24. User-Defined DIP Switch Schematic Signal Names and Functions
Board Reference Description
Schematic
Signal Name
I/O Standard
Cyclone IV GX Device
Pin Number
SW2.1
User-defined DIP switch connected to
FPGA device. When the switch is in
the OPEN or OFF position, a logic 1 is
selected. When the switch is in the
CLOSED or ON position, a logic 0 is
selected.
USER_DIPSW0
2.5-V
A5
SW2.2 USER_DIPSW1 G15
SW2.3 USER_DIPSW2 E9
SW2.4 USER_DIPSW3 C8
SW2.5 USER_DIPSW4 C4
SW2.6 USER_DIPSW5 F14
SW2.7 USER_DIPSW6 G12
SW2.8 USER_DIPSW7 E7