BINDER KBF 115 - Manual (Page 88)

KBF / KBF P (E5.3) 09/2014 page 88/110
17. Disposal
17.1 Disposal of the transport packing
Packing element Material Disposal
Straps to fix packing on pallet Plastic Plastic recycling
Wooden transport box (option)
with metal screws
Non-wood (compressed match-
wood, IPPC standard)
Wood recycling
Metal Metal recycling
Pallet
with foamed plastic stuffing
Solid wood (IPPC standard) Wood recycling
PE foam Plastic recycling
Transport box
with metal clamps
Cardboard Paper recycling
Metal Metal recycling
Top cover Cardboard Paper recycling
Edge protection Styropor ® or PE foam Plastic recycling
Protection of doors and racks PE foam Plastic recycling
Bag for operating manual PE foil Plastic recycling
Insulating air cushion foil (packing
of optional accessories)
PE foil Plastic recycling
If recycling is not possible, all packing parts can also be disposed of with normal waste.
17.2 Decommissioning
Turn off the main power switch (3) and humidity switch (4). Disconnect the unit from the power supply.
Remove the water installation.
Having turned off the unit by the main power switch (3), always close the tap used for the wa-
ter supply.
• Temporal decommissioning: See indications for appropriate storage, chap. 3.3.
• Final decommissioning: Dispose of the unit as described in chap. 17.3 to 17.5.
17.3 Disposal of the unit in the Federal Republic of Germany
According to directive 2002/96/EC of the European Parliament and of the Council on waste electrical and
electronic equipment (WEEE), BINDER devices are classified as “monitoring and control instruments”
(category 9) only intended for professional use“. They must not be disposed of at public collecting points.
The constant climate chamber KBF / KBF P bears the symbol for the marking of electrical
and electronic equipment manufactured / placed on the market in the EC after 13 August
2005 and be disposed of in separate collection according to the directive 2002/96/EC on
waste electrical and electronic equipment (WEEE) and German national law for electrical
and electronic equipment (Elektro- und Elektronikgerätegesetz, ElektroG). WEEE marking:
crossed-out wheeled bin with solid bar under. A significant part of the materials must be
recycled in order to protect the environment.
At the end of the device’s service life, have the device disposed of according to the German
national law for electrical and electronic equipment (Elektro- und Elektronikgerätegesetz,
ElektroG) from 23 March 2005, BGBl. I p. 762 or contact BINDER service who will organize
taking back and disposal of the unit according to the German national law for electrical and
electronic equipment (Elektro- und Elektronikgerätegesetz, ElektroG) from 23 March 2005,
BGBl. I p. 762.