BINDER KBF 115 - Manual (Page 99)

KBF / KBF P (E5.3) 09/2014 page 99/110
19.5 Equipment and options
To operate the constant climate chamber, use only original BINDER accessories or accesso-
ries / components from third-party suppliers authorized by BINDER. The user is responsible
for any risk arising from using unauthorized accessories.
Regular equipment
Microprocessor display program controller with 2-channel technology for temperature and humidity
Ethernet interface for computer communication
Temperature safety device class 3.1 acc. to DIN 12880
Inner glass door with gasket
DCT™ refrigerating system with refrigerant R134a
Microprocessor controlled humidifying and dehumidifying system *) (humidity range, see diagram)
Sizes 240 and 720: four castors (2 lockable)
2 racks, stainless steel
Access port 30 mm with silicone plug
ICH compliant illumination for photo stability testing:
ICH light (cool white + BINDER Q1B Synergy Light, 2 light cassettes (KBF P)
Options / accessories
Additional rack, stainless steel
Perforated shelf ,stainless steel
Reinforced rack with lockings
Securing elements for fastening of racks (4 pieces)
Light cassette (KBF P)
Set of fluorescent tubes ICH light (cool white + BINDER Q1B Synergy Light) for 1 light cassette (KBF P)
Temperature safety device class 3.3 acc. to DIN 12880
Zero-voltage relay alarm outputs for temperature and humidity with DIN plug 6-poles
Interior lighting (not for UL units)
Keyboard locking (BINDER INDIVIDUAL customized solutions)
Lockable door
Interface RS422
BINDER Data Logger kit for temperature / humidity: TH 70 (chamber values) or TH 70/70 (chamber and
ambient values)
Flexible Pt 100 temperature sensor, output to DIN socket
External freshwater and wastewater cans (20 liters / 0.71 cu.ft. each)
BINDER Pure Aqua Service
Exchange cartridge for BINDER Pure Aqua Service
Access ports 30 mm, 50 mm, or 100 mm with silicone plug
Water protected internal socket 230 V AC (not for UL units)
Safety kit for water connection with hose burst protection device and reflux protection device, pre-
mounted assembly (BINDER INDIVIDUAL customized solutions)
Analog outputs 4-20 mAmp for temperature and humidity with 6 pole DIN socket, DIN plug included
Calibration of temperature and humidity including certificate
Spatial temperature and humidity measurement including certificate
Spatial temperature and humidity measurement acc. to DIN 12880 including certificate
Certificate illumination measurement: Radiometrical measurement in visible and UVA spectral range with
documentation of intensity distribution and of qualitative spectral distribution (KBF P)
Qualification folder