Proceed PMDT - Manual (Page 58)

58
Rack Mount Kit
If you need or prefer to rack mount your PMDT, contact your Proceed dealer
about the optional rack mount kit. This purpose-designed assembly replaces
the standard top cover of the unit with one designed to support this relatively
heavy component solely from the “ears” that bolt into the rack.
To use the rack mount kit, simply replace the standard top cover with the rack
mount top cover. (Full instructions are included with the top cover when pur-
chased separately.) Once the rack mount top cover is in place, you may bolt
the entire unit securely to any EIA-standard rack. Alternatively, you may find it
easier to mount the top cover in the rack, and to then slide the “topless”
PMDT into place.
(The illustration above depicts the Proceed AVP/AVP2, but the kit and mount-
ing system for both is the same.)