Proceed PMDT - Manual (Page 8)

8
Operating Voltage
& Frequency
The PMDT is set at the factory (internally) for 100V, 120V, 200V, 220V or 240V
AC mains operation as appropriate for the country in which it is to be sold.
(230V/50Hz only in European Union countries, in compliance with CE
regulations.) Make sure that the label on the rear panel of the PMDT (beside
the AC input receptacle) indicates the correct AC operating voltage for your
location. Attempting to operate the PMDT at an incorrect voltage can damage
the unit.
The PMDT modular DVD transport is also set at the factory for operation
on either 50Hz or 60Hz AC line frequencies, as appropriate for the country
in which it is to be sold. It will not operate if it senses an incorrect line
frequency.
Neither the voltage nor the line frequency setting may be changed by the user.
Voltage label
No User Serviceable Components Inside. For service, contact Madrigal Audio
Laboratories or an Authorized Dealer. Any modifications to this equipment will void all warranties.
Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,577,216;
4,819,098 and 4,907,093 licensed for limited viewing uses only.
S/N
designed and manufactured in USA
www.madrigal.com
m o d u l a r D V D t r a n s p o r t
BEFORE ATTEMPTING TO OPERATE THIS
DEVICE, REFER TO OWNER'S MANUAL FOR PROPER
OPERATING INSTRUCTIONS AND SAFETY PRECAUTIONS.
HAZARDOUS VOLTAGE AVAILABLE INSIDE; DISCONNECT
AC ~ MAINS CABLE BEFORE OPENING UNIT.
WARNING:
If the AC mains voltage or frequency indicated on your PMDT is incorrect,
please contact your local, authorized Proceed dealer or distributor.
The PMDT can easily be powered by a normal 15-Ampere AC mains line. If
other devices are also powered from the same AC line, their additional power
consumption should be taken into account.