AGI Security SYS-HC0451S2 - Manual (Page 173)

163
Please highlight icon to select the corresponding alar m output.
After all the setups please click OK button, system goes back to the previous menu. See Figure 4-98.
Figure 4-98
4.10.4 Storage
It is to set HDD management, storage parameter s, set record plan and record control.
4.10.4.1 Schedule
It is for you to set record plan and snapshot plan.
4.10.4.1.1 Record
Note:
You need to have proper r ights to implement the following operations. Please make sure the HDDs
have been properly installed.
After the system booted up, it is in default 24-hour regular mode. You can set record type and time in
schedule interface.
In the main menu, from Setting->Storage->Schedule, you can go to schedule menu. See F igure
4-102.
Please note you need to go to main menu->Setting->System- >General->Holiday to set holiday
date first, otherwise, there is no holiday setup item.
 Channel: Please select the channel
number first. You can select “all” if you want to set for the whole
channels.
 : Sync connection icon. Select icon of several dates, all checked items can be edited
together. Now the icon is shown as .