AGI Security SYS-HC0451S2 - Manual (Page 47)

37
Figure 2-2
Please refer to the following sheet for front panel button information.
SN Icon Name Function
1
USB port
To connect USB storage device, USB mouse and
etc.
2
Alarm Alarm indicator light
When an alarm occurs, the light becomes red to
alert you.
3
NET
Network abnormal
indicator light
Network error occurs or there is no network
connection, the light becomes red to alert you.
3
HDD
HDD abnormal
indicator light
HDD error occurs or HDD capacity is below
specified threshold value, the light becomes red
to alert you.
5
IR IR Receiver
It is to receive the signal from the remote
control.
6
ESC ESC
Go to previous menu, or cancel current
operation.
When playback, click it to restore real-time
monitor mode.
7
FN Assist
One-window monitor mode, click this button to
display assistant function: PTZ control and image
color.
Backspace function: in numeral control or text
control, press it for 1.5seconds to delete the
previous character before the cursor.
In motion detection setup, working with Fn and
direction keys to realize setup.
In text mode, click it to switch between numeral,
English character(small/capitalized) and etc.
Realize other special functions.
8
Enter ENTER
Confirm current operation
Go to default button
Go to menu
9
Power button
Power button, press this button for three seconds
to boot up or shut down DVR.
、
Up
Down
Activate current control, modify setup, and then
move up and down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
、
Left
Right
Shift current activated control,
When playback, click these buttons to control
playback bar.
2.1.3 Econimic 720P/ Econimic 720P(V2)/ Econimic 1080P(V2) Series
The interface is shown as below. See Figure 2-3.