AGI Security SYS-HC0451S2 - Manual (Page 258)

248
Here you can set device alarm type and alarm sound setup (Please make sure you have enabled audio
function of corresponding alarm events.).
Figure 5-101
Please refer to the following sheet for detailed information.
Type Parameter Function
Alarm
Type Video loss System alarms when video loss occurs.
Motion detection System alarms when motion detection alarm
occurs.
Tampering System alarms when camera is viciously masking.
Disk full System alarms when disk is full.
Disk error System alarms when disk error occurs.
External alarm Alarm input device sends out alarm.
Operation
Prompt Check the box here, system can automatically
pops up an alarm icon on the Alarm button in the
main interface when there is an alarm.
Alarm
Sound Play alarm
sound System sends out alarm sound when an alarm
occurs. You can specify as you wish.
Sound path Here you can specify alarm sound file.
5.12 Log out
Click log out button, system goes back to log in interface. See Figure 5-102.
You need to input user name and password to login again.