AGI Security SYS-HC0451S2 - Manual (Page 243)

233
Figure 5-72
Please refer to the following sheet for detailed information.
Parameter Function
Enable tour
Check the box here to enable tour function.
Interval
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Split
Here you can set window mode and channel group. System can
support 1/4/8-window according to device channel amount.
Motion
tour/Alarm
tour
Here you can set motion detect tour/alarm tour window mode.
System supports 1/8-window now.
5.8.5.2.3 Zero Channel
The zero-channel interface is shown as in Figure 5-73. Here you can enable zero-channel function and
set corresponding information.
Figure 5-73
Please refer to the following sheet for detailed information.
Parameter Function
Enable
Check the box here to enable zero-channel function.
Compression System supports H.264.
Resolution
Please select from the dropdown list. System supports
D1/CIF/QCIF and etc.