AGI Security SYS-HC0451S2 - Manual (Page 182)

172
The HDD detect function is to detect HDD current status so that you can clearly understand the HDD
performance and replace the malfunction HDD.
There are two detect types:
 Quick detect is to detect via the universal system files. System can quickly complete the HDD scan.
If you want to use this function, please make sure the HDD is in use now. If the HDD is removed
from other device, please make sure the write-data once was full after it installed on current device.

Global detect adopts Windows mode to scan. It may take a long time and may affect the HDD that
is recording.
4.10.4.4.1 Manual Detect
The manual detect interface is shown as below. See Figure 4-114.
Please select detect type and HDD. Click start detect to begin. You can view the corresponding detect
information. See Figure 4-115.
Figure 4-114