AGI Security SYS-HC0451S2 - Manual (Page 190)

180
function is disabled. After you enabled this function, login the Web and you can select zero-channel
encoding mode at the right corner of the interface . Select a mode; you can
view the local preview video.
Figure 4-124
4.10.5.2.4 Favorites
It is for you to set and save favorites preview setup. You can select different window display modes and
then select corresponding channel(s). Please note for one mode, one channel can only be selected once.
See Figure 4-125.
 Set channels: Click it you get channel setup information of current preview interface. For example. If
you window split mode is 4 and channel setup includes channel 1/2/3/4, you can see 4 from the spl it
dropdown list and then see channel 1/2/3/4 at the middle of the interface.
 Get channels: Click it to activate current setup. You can see current setup effect on the screen right
now.
 Default: it is to restore factory default setup. For example, 1-window mode, it is to display channel 1
and 4-window mode, it is display channel 1/2/3/4.
 Save: Click it to save current setup to Favorites folder. Otherwise, you can not find current setup in
the Favorites.