4 connecting power supply, 5 connecting video input and output devices, 1 connecting video input – AGI Security SYS-HC0451S2 User Manual

Page 98: Connecting power supply, Connecting video input and output devices, Connecting video input

Advertising
background image

88

Put the co ver in accordance with the

clip and then place the upper cover
back.

Secure the screws in the rear panel

and the side panel.

Important:
 You can connect the HDD data cable and the power cable first and then fix the HDD in the device.
 Please pay attention to the front cover. It adopts the vertical sliding design. You need to push the

clip first and then put down.

3.4 Connecting Power Supply

Please check input voltage and device power button match or not.

We recommend you use UPS to guarantee steady operation, DVR life span, and other peripheral

equipments operation such as cameras.

3.5 Connecting Video Input and Output Devices

3.5.1 Connecting Video Input

The video input interface is BNC. The input video format includes: PAL/NTSC BNC(1.0V

B

P- P

B

75Ω.)

The video signal should comply with your national standards.

The input video signal shall have high SNR, low distortion; low interference, natural color and suitable

lightness.

Guarantee the stability and reliability of the camera signal:

The camera shall be installed in a cool, dry place away from direct sunlight, inflammable, explosive

substances and etc.

The camera and the DVR should have the same grounding to ensure the normal operation of the

camera.

Guarantee stability and reliability of the transmission line

BTTTB

Please use high quality, sound shielded BNC. Please select suitable BNC model according to the

transmission distance.

If the distance is too long, you should use twisted pair cable, and you can add video compensation

devices or use optical fiber to ensure video quality.

You should keep the video signal away from the strong electromagnetic interference, especially the high

tension current.

Keep connection lugs in well contact

BT

TTB

The signal line and shielded wire should be fixed firmly and in well connection. Avoid dry joint, lap

welding and oxidation.

BTTTB

Advertising