Cadac SAM - Manual (Page 21)

Set the console configuration 2-9
Revision SAM2005-2 Sound Automation Manager
5141: 8SGDWH#6pDQFH
To update the Seance program, the Séance box needs to be switched ON and a util-
ity called SAM SETUP needs to be run on the PC.
Update the Séance program from SAM SETUP by performing the following steps:
1. In the SAM SETUP main menu click on Séance.
2. Click on Open Port.
3. In the Network Settings window, make sure that the Séance IP-address is identi-
cal to the one specified in Communication Setup on page 8 in the Séance Instal-
lation & User manual
4. Make sure that the port setting for the Local port is the same as for the SAM
SETUP port.
5. Make sure that the port setting for the remote port is identical to the one for the
Séance SETUP port (see Communications Setup on page 8 in the Séance
Installation & User manual).
6. Click OK.
7. In the SAM SETUP main menu, click on Séance.
8. Select Update Séance.
9. When Update has transferred all the files, press the Version button under the dis-
play window on the Séance box. Check that the display shows correct version
number, release date and time for update.
If the update has been successful, the Séance will restart using the new executable.
It is possible to download other files to the Séance box in this way by using the
Update files option in the file menu.
:$51,1*= Do not add leading zeros into the IP-address (i.e. the address
194.222.033.011 should be typed 194.222.33.11). If this is not observed, the com-
puter will not communicate.