Cadac SAM - Manual (Page 60)

7-2 Viewing and editing the Cue data
Sound Automation Manager Revision SAM2005-2
:15 7KH#)DGHU#IUDPH#ZLQGRZ+V,
To view fader data, click on one of the fader frame icons. This displays a fader frame
window with a picture of the console faders, see
fig 7-2 . Note that when SAM first
loads a show, the Cue window does not show the cursors. Press the PageDn key on
the keyboard to have the cursor move onto the first cue. The fader frame views can
then display the cue data.
The types of faders and their positions in the frame are determined by the selections
in SAM Setup (see section
2 Set the console configuration ).
When you recall a cue, the fader frame window and any other open window associ-
ated with the cue, will display the cue contents. The amount of data available
depends on the console type and the type of modules in it. Generally, the channel
faders have a VCA-group and switches for Mute and Aux. Some fader types have
more switches. In the case of motorised faders, the fader knob also changes position
to show the recorded level.
Left-clicking with the mouse over a fader selects that fader. A green icon with red
arrows above the fader indicates this. Shift-clicking or Ctrl-clicking selects further fad-
ers. Some data items can be entered directly using the quick keys, described in the
following section. More extensive editing can be performed through the Fader Detail
window (see
7.2.1 The Fader detail window ).
FIG 7-2. The SAM toolbar and the fader frame view.
61#7KH#)DGHU#IUDPH#ZLQGRZ#RSHQV
41#&OLFN#RQ#&RQVROH#9LHZ
51#&OLFN#RQ#WKH#)DGHU#IUDPH#LFRQ