Cadac SAM - Manual (Page 46)

5-6 Configuring the Sound Automation Manager
Sound Automation Manager Revision SAM2005-2
818 'LUHFWRULHV
The information stored by SAM is kept in different files and directories. To specify the
directories, click on Options in the menu bar and then click Directories to open a new
window labelled Configure.
1. In SHOW, you keep the shows. Each show constitutes a directory containing all
files associated with that show.
2. In SETTINGS, you keep the operational settings like the ones you performed in
5.3 User Properties .
3. In BACK-UP, you can specify a different directory, drive or device for making
back-up copies of the show, user settings etc.
4. In USER you specify where User Setup files are stored.
In order to avoid affecting SAM’s ability to find the required files associated with
Show or User Settings the next time you run SAM, be careful when changing these
directories.
819 &RPPXQLFDWLRQV
81914 2SHQ#FRPPXQLFDWLRQV
In the dialog box in fig 5-7 enter the appropriate values in the boxes provided (see
Communications Setup in the Séance User Manual).
FIG 5-6. Specifying the directories.
&OLFN#2SWLRQV &OLFN#'LUHFWRULHV
FIG 5-7. Specifying the directories.