Compuprint MDP40B Programmer Manual - Manual (Page 111)

B-4
DC4 DC4 ESC 3 6
Sets vertical spacing 6 lines/30 mm. (Compuprint)
ASCII Code DC4 DC4 ESC 3 6
Hexadecimal Value 14 14 1B 33 36
Decimal Value
20 20 27 51 54
This command sets vertical spacing to 6 lines per 30 mm.
DC4 DC4 ESC 3 8
Sets vertical spacing 8 lines/30 mm. (Compuprint)
ASCII Code DC4 DC4 ESC 3 8
Hexadecimal Value 14 14 1B 33 38
Decimal Value
20 20 27 51 56
This command sets vertical spacing to 8 lines per 30 mm.
DC4 DC4 ESC A
Sets the horizontal spacing to 15, 17, 20, 24 CPI. (Compuprint)
ASCII Code DC4 DC4 ESC A n
Hexadecimal Value 14 14 1B 41 n
Decimal Value 20 20 27 65 n
This is terminator code and therefore causes the current contents of the print buffer to
be printed out. Then, the subsequent characters will be printed at the horizontal
spacing specified by the n parameter.