Compuprint MDP40B Programmer Manual - Manual (Page 96)

A-94
DC3
Deselects printer. (EPSON ESC/P2)
ASCII Code DC3
Hexadecimal Value 13
Decimal Value
19
This code deselects the printer. The printer remains deselected until it receives a DC1
command or power is turned off then on again. The printer ignores the ESC @
command (initialize printer) when it is deselected.
DC3
Deselects printer. (IBM Proprinter XL24/24E)
ASCII Code DC3
Hexadecimal Value 13
Decimal Value
19
This code is ignored on the parallel interface. On the serial interface the printer sends
this control code to indicate that its buffers are full.
In 4722 and 9068 emulations the command is treated as NULL.
ESC DC3
Deselects printer. (IBM Proprinter XL24/24E)
ASCII Code ESC DC3
Hexadecimal Value 1B 13
Decimal Value
27 19
See the description of the DC3 command above.