Compuprint MDP40B Programmer Manual - Manual (Page 12)

A-10
ESC J
Advances paper n/180 inch. (EPSON ESC/P2)
ASCII Code ESC J n
Hexadecimal Value 1B 4A n
Decimal Value 27 74 n
Range 0 < n < 255
This is a terminator code; it therefore causes the current contents of the print buffer to
be printed out before performing a single line LF of n/180 inch. This command is
cancelled after the LF has been performed. The printing will restart after a line feed
from the column at which the command was sent.
ESC J
Advances paper n/216 inch. (IBM Proprinter XL24/XL24E, 2391+)
ASCII Code ESC J n
Hexadecimal Value 1B 4A n
Decimal Value 27 74 n
Range 0 < n < 255
This is a terminator code; it therefore causes the current contents of the print buffer to
be printed out before performing a single line LF of n/216 inch. This command is
cancelled after the LF has been performed. The printing will restart after a line feed
from the column at which the command was sent.