Compuprint MDP40B Programmer Manual - Manual (Page 159)

C-17
ESC ! sp
Add columns to right of character. (Olivetti PR2)
ASCII Code ESC ! sp m
Hexadecimal Value 1B 21 20 m
Decimal Value 27 33 32 m
This command may be used to add to the current print pitch a number m of columns
expressed in n/120" (with n = 001-255D). If, after defining the interspace, the print of
the nth character is outside the right logic margin (90 characters at 10 cpi), the print
will generate “command specification error”.
The command is not accepted (command specification error) if it is sent when current
print pitch is proportional.
ESC sp
Add columns to right of character. (Olivetti PR2)
ASCII Code ESC sp m
Hexadecimal Value 1B 20 m
Decimal Value 27 32 m
See description of the ESC ! sp command above..
ESC (
Bold face. (Olivetti PR2, PR40+)
ASCII Code ESC (
Hexadecimal Value 1B 28
Decimal Value 27 40
Sets bold face printing starting from the current position. The command is not
accepted if it is sent with the OCR-A or B Font selected.