Compuprint MDP40B Programmer Manual - Manual (Page 49)

A-47
n Types
0 No change
From 1 to 127 Draft
From 128 to 254 Letter Quality
255 Default Quality
ESC [ I
Sets font and pitch of a character. (IBM 2391+)
ASCII Code ESC [ I 2 0 m n
Hexadecimal Value 1B 5B 49 02 00 m n
Decimal Value
27 91 73 2 0 m n
This command allows modifying the font and pitch type style of a character.
The values 2 and 0 are constants. If font lock and pitch lock are active, this command
is ignored. To select the values for the variables m and n, which identify the pitch and
the font type style to use, refer to the table below.
1. Identify the type style (pitch and font) to use in the left column (pitch).
2. For the hexadecimal values for m n, look across the row to the second column (Hex m n).
3. For the decimal values for m n, look across the row to the third column (Decimal m n).
Substitute these values for m n in the printer command syntax.