Compuprint MDP40B Programmer Manual User Manual
Page 132
B-25
B
0, not defined
I
0, not defined
Rn
0
rof
2 / 10 mm
Due to the physical position of the sensor, the scanning of the bars can be performed
with the following horizontal position limitations:
CUT SHEET
x
The scanning area must be inside 19 cm from the left paper margin;
the area may extend to 205 cm, but in this case the reading of the
bars depends on the position in which the sheet is inserted.
FANFOLD
x
The scanning area must be at least at 2 cm from the first printing
position.
The background of the scanning area must have a clear color, whereas the bars must
have a dark color (black, dark blue, etc.).
In case the horizontal scanning is performed normally:
between x , y and (x + w) , y
In case the horizontal scanning is performed in inverse
direction:
between (x + w) , y
and x , y
x+w
x
w
y