Compuprint MDP40B Programmer Manual - Manual (Page 55)

A-53
ESC E
Sets emphasized printing.
(IBM Proprinter XL24/XL24E, 2391+, 4722, 9068, EPSON ESC/P2)
ASCII Code ESC E
Hexadecimal Value 1B 45
Decimal Value 27 69
This command starts emphasized printing. The print head strikes each dot twice to
produce a darker, bolder character. The second strike is offset horizontally.
ESC F
Cancels emphasized printing.
(IBM Proprinter XL24/XL24E, 2391+, 4722, 9068, EPSON ESC/P2)
ASCII Code ESC F
Hexadecimal Value 1B 46
Decimal Value 27 70
This command ends emphasized printing. This escape sequence cancels emphasized
printing that was set by ESC E.
ESC G
Sets double strike printing.
(IBM Proprinter XL24/XL24E, 2391+, 4722, 9068, EPSON ESC/P2)
ASCII Code ESC G
Hexadecimal Value 1B 47
Decimal Value 27 71
This command starts double-strike (NLQ) printing. ESC G must be canceled by ESC H.