Esc sp b – Compuprint MDP40B Programmer Manual User Manual
Page 194
C-52
Byte m:
bit 8: = 0 fixed
bit 7: = 1 fixed
bit 6: = 0 reserved
bit 5: = 0 reserved
bit 4: = 0 reserved
bit 3: = 0 reserved
bit 2,1:= 0 0 Document not present.
0 1 Document parked.
1 0 Document aligned.
1 1 Document inserted.
Key:
Document parked
Position assumed by the document downstream of a SW
ejection (ESC O)
Document aligned
Position assumed by the document downstream of a manual
introduction into the paper stand.
Document inserted
Position assumed by the document downstream of a paper
insertion from SW command (ESC L nnn)
ESC sp b
Request for FW Release ID. (Olivetti PR2)
ASCII Code
ESC sp b
Hexadecimal Value
1B 20 62
Decimal Value
27 32 98
This command requests the printer to indicate its FW Release ID.
The command generates a command specification error (The request is fulfilled in any
case) if it is sent inside a printing field.