Compuprint MDP40B Programmer Manual - Manual (Page 36)

A-34
ESC SP
Sets intercharacter space. (EPSON ESC/P2)
ASCII Code ESC SP n
Hexadecimal Value 1B 20 n
Decimal Value 27 32 n
Range 0 < n < 127
This command sets the intercharacter space to n/120 inch in Draft printing and n/180
inch in Quality printing.
ESC [ J
Sets 5 lpi. (IBM 4722, 9068)
ASCII Code ESC [ J n
Hexadecimal Value 1B 5B 4A n
Decimal Value
27 91 74 n
This command sets the line-spacing distance in increments of 1/1440 inch. The only
value that is accepted is 288/1440 (1/5 inch).
ESC X
Sets left and right margins. (IBM Proprinter XL24/XL24E, 2391+, 9068)
ASCII Code ESC X n
1
n
2
Hexadecimal Value 1B 58 n
1
n
2
Decimal Value 27 88 n
1
n
2
Range 0 < n
1,
n
2
< 255
This command specifies left and right margin positions. The n
1
and n
2
parameters
indicate respectively the number of columns for the left and right margins at the