Rena T-950 - Manual (Page 51)

SETUP & OPERATION
45
7. Press the EXIT soft key three times to return to the Start-Up screen.
8. Test the TABBER for proper operation. If you experience tab advancement or
positioning problems, verify proper paper transport setup, media length, tab liner type
and tab pitch settings. Important! If the tab liner type or tab pitch values needed to be
changed, then you will need to repeat the tab sensor setup procedure.
Tip: Before you begin running the tabber, please make sure the tab drive press rollers are
engaged with the tab drive roller and the unwind drive press roller is engaged with the
unwind drive roller. It is common to forget to engage these rollers after threading the
tabber with tabs/stamps/labels.