Rena T-950 - Manual (Page 8)

GETTING ACQUAINTED
2
Packaging/Shipping
The Tabber is shipped in appropriate packaging so that, under normal shipping conditions, it reaches its
destination without damage.
NOTICE: Report damage to the carrier. The carrier is liable for any damage during transport. Transport
and storage should take place under normal conditions, i.e. at temperatures between +5°C and +70°C and
relative air humidity of up to 80%. Exposure to conditions that are not permissible may lead to damage
which is not externally visible.
IMPORTANT Please save the packaging materials for future use! It will be required if you ever need to
ship the Tabber.
Contents
The following items are included with your tabber:
1 Operations Manual
1 Head Assembly
1 Tab Reel Side Guide
1 Take-up Reel Side Guide
1 Power Cord
1 2” Tab Applicator Head (for tabs/labels 2” wide or less)
1 4” Label Applicator Head (for labels over 2” wide, up to 4” wide, and Post-it
® notes.)
1 Fan Folded Label Tray 1 (for labels 2” long or less)
1 Fan Folded Label Tray 2 (for labels over 2” long, up to 7” long)
1 Sample Roll of Tabs
Note: Additional Tabs can be purchased through your local Rena dealer.
1 Feeder Interface Cable (Part #: 33E-500-192)
Cable part # “33E-500-192” can be used with the following Rena feeder models:
EasyFeed 120, EasyFeed 200, XPS-ProFeed.
Cable part # “33E-500-192 rev A” can also be used with the XPS-ProFeed Shuttle.
The above cables can NOT be used with the EasyFeed Lite or AF500 feeders.