Rena T-950 - Manual (Page 63)

MAINTENANCE
57
SECTION 4 – Maintenance
Cleaning
WARNING
THE TABBER IS A PRECISION MACHINE THAT SHOULD BE
CLEANED REGULARLY TO INSURE MANY YEARS OF SERVICE.
BEFORE PERFORMING ANY MAINTENANCE, DISCONNECT THE
MACHINE FROM ITS POWER SOURCE!
The Tabber must be cleaned regularly of accumulated paper dust and ink. Depending on the
types of media that are run, paper dust may accumulate within the tabber and on the transport.
To clean the tabber, unplug it from the power receptacle and remove the covers.
The internal areas are best cleaned with a vacuum that has a soft brush attachment to help loosen
the dust particles. Take care not to damage the PC Boards or electrical wiring.
The exterior of the machine may be cleaned with any standard household cleaner, which is non-
abrasive and does not contain plastic harming solvents.
CAUTION
NEVER SPRAY OR POUR CLEANERS DIRECTLY ON OR INTO THE
TABBER. EXCESS LIQUID COULD HARM ELECTRONIC PARTS.
ALWAYS DAMPEN A RAG WITH THE CLEANER AND APPLY IT TO
THE PARTS TO BE CLEANED.
Rollers and Transport belts
The belts and rollers can become glazed with paper lint and ink from the media. They should
be regularly cleaned with a mild abrasive household cleaner on a damp cloth.
Avoid using solvents on the belts and rubber rollers.