Sierra Video G.R.I.P. V3.1.0 - Manual (Page 15)

GRIP 3.1.0
9
Communications Setup
If the following message is displayed, you may need to set the communication
parameters of the software program to match the settings of the router
.
If the above message appears, click on “Demo Mode” and the program’s “main screen”
will appear.
Select “Communications Setup” in Router Configuration menu.
RS232 serial communications Baud rate and Com Port is selected in the following menu.
The factory default is Com 1, 9600 Baud.
Note:
*It is recommended that you set the router’s Host port baud rate and GRIP to 115200 Baud for
optimum performance. Otherwise operation of GRIP may be sluggish.
Be sure that the Baud rate matches the value set in your router. See your specific
router’s manual for details on setting the router’s Baud rate.
Any changes to these settings will cause a message to be displayed asking you to close
and reopen the program. This will initiate the changes.
Once communication has been established with the router and the Program’s database
concurs with the router settings, you may proceed.