Sierra Video G.R.I.P. V3.1.0 - Manual (Page 23)

GRIP 3.1.0
17
SCP Series Setup (Other than the SCP-200)
The SCP line of control panels requires switcher software version 7.01 or newer for
programming compatibility.
We begin with a brief discussion on the SCP panel’s programmability concepts. These
panels were designed to allow for maximum flexibility in the categorization of buttons. A
button can have multiple functions depending how it is programmed and where the user
is in the sequence of pushes. As an example, the first push on a Button could write “VTR”
on the display. The second push on the same button could add a “1” to “VTR” as a suffix
so we would see “VTR1” on the display. If another number programmed button were
pushed, such as a 3, we could see “VTR13” on the display. The Second Push row would
remain enabled until the “Shift”, “Clear”, or the “Take” button were selected and would
force the panel into a different set of actions.
The Shift Push is similar to the Ctrl key on the PC, which allows different functions to be
performed on the panel, such as toggling between “Alpha” and “Sort” on numerical values
during a scroll function. All Buttons in the SCP line of control panels are soft key. That is,
every key can be programmed. As an example, the SCP-112 can become a 12-button
salvo panel, or only a 6 destinations and 6 sources control panel.