Sierra Video G.R.I.P. V3.1.0 - Manual (Page 19)

GRIP 3.1.0
13
The names window is an Excel type display for easy alphanumeric name entry.
Downloading names to a large routing switcher can take up to a couple of minutes,
depending on the switcher size. A status bar with a cancel button is displayed as
downloading begins. All downloads are happening in the background mode in the routing
switcher, with routing given the highest priority, hence adding delays to the name
download.
This window has the ability to accept a “Paste” from an Excel spreadsheet.
Enter the Dst (Destination), Src (Source), and level names.
“Save to Database” Saves the names to the GRIP database only (This is for working
offline”.
“Transmit to Router” Sends the names to the router’s processor and saves the
information to the GRIP database.
Control Panel Settings – General Settings
This section applies to all control panels using RS-485 (3 pin mini XLR connector)
communication.
Clicking on the “Control Panel Setup/ General Settings” displays the following window
and causes G.R.I.P. to poll the routing switcher for all panels, which are connected on the
SVS control panel bus.