Mapping your router using grip – Sierra Video G.R.I.P. V3.1.0 User Manual
Page 62
Sierra Video Systems
56
Mapping Your Router Using GRIP
Router mapping configuration changes can be implemented using the GRIP router
configuration and control software.
The basic tasks are to decide which router inputs will receive signals from which
machines; likewise for the outputs; choose names for each of these input and output
signals; decide which source numbers are to be assigned to each input connector on
each level; and likewise which destination numbers are to be assigned to each output
connector on each level as described in the previous section of this manual..
You must first install and run the GRIP program according to the instructions in the GRIP
manual. Select “yes” to update the GRIP database to match your router’s current
configuration for all levels.
Once the GRIP main screen opens, press Ctrl/Shift/U simultaneously. The
“Utilities/Special Functions” menu item will appear on the menu bar.