Super Systems 9010 Series - Manual (Page 23)

SSi Manual Series 9010 – eSPP Programmer Page 23
The default IP Address is: 192.168.0.200
The default IP Address Gateway is: 192.168.1.1
Instrument Assignments
WARNING: This screen should not be changed
without consulting SSi at 800-666-4330.
This screen will allow the user to configure up to
thirty-two slave instruments through the 9010
controller. To set up a slave instrument, highlight
the instrument number and click on the Edit button.
The list of available slave instruments will be shown
on the screen. The list is color coded by type – Blue
for Atmosphere, Red for Temperature, and Yellow
for Events. Highlight an instrument to select it as
the instrument to use.
The list of controllers includes the following Atmosphere Controllers:
 SSi AC20
 Yokogawa 750
 Honeywell UDC3300
 Dualpro LP1 Modbus
 Dualpro LP2 Modbus
 Dualpro LP1 MMI
 Dualpro LP2 MMI
 Eurotherm 2402
 Eurotherm 2500
 Carbpro v3.5
 Carbpro v3.0
 CarbPC
 9200 Loop 1
 IR Base
 MGA
This list of controllers includes the following Temperature Controllers:
 SSi 7EK
 Yokogawa 750
 Honeywell UDC3300
 Dualpro LP1 Modbus
 Dualpro LP2 Modbus
 Dualpro LP1 MMI
 Dualpro LP2 MMI
 Eurotherm 2402
 Eurotherm 2500
 Unipro v3.5
 Unipro v3.0
 Carbpro v3.5 Slave