Super Systems 9010 Series - Manual (Page 26)

SSi Manual Series 9010 – eSPP Programmer Page 26
The five options within programmer type are Carbon, Dewpoint, Oxygen, Millivolts, and Multiloop. Select
the appropriate choice to communicate to the controller the type of condition it is currently running.
Multiloop applies to temperature only. The operator will need to change the control instrument (such as
the AC20) accordingly.
Furnace Name
This allows the operator to assign a name to the furnace by typing it in and pressing enter.
Atm Wait Limit
When an atmosphere wait-limit is assigned, the recipe running will not move to the next step until the
furnace has reached the target carbon percentage.
Temp Wait Limit
When a temperature wait limit is assigned, the recipe running will not move to the next step until the
furnace has reached the target temperature.
Date and Time
This will adjust the date and time of the controller, but not the actual operator interface. The date and
time of the operator interface can be changed by going to through the desktop.
Default Hold Time
This allows the operator to put a hold on the current recipe running. The recipe will stay on hold for the
duration of the default hold time if the operator does not advance the recipe. When the default hold
period is up, an alarm will sound.
Deviation Alarm Delay
This value is the delay for the alarm in minutes if a deviation alarm is detected.
End of Quench Event
This option allows the operator to assign an event to signal when the quench is over.
Quench Speed Event
This option allows the operator to assign an event that will signal the speed the quench.
Quench Run Event
This event will signal the start of the quench.
Clear events @ end of recipe
The operator can choose either yes or no. If no is selected, then events will stay on after the recipe is
finished. For instance, if one of the events turns a light on during the recipe, this light will remain lit until
the operator manually turns it off if events are not cleared at the end of the recipe.
Temperature
This allows the operator to choose either C°or F° as the units
for temperature.
Security
The Security menu option is a feature that is used to limit
access to certain menu options and parameters that are vital
to successful operation and communication of your
instrument. This page comes pre-configured by Super