Network requirements, Configuration considerations, Configuration procedure – H3C Technologies H3C S12500 Series Switches User Manual
Page 193
179
IAID: 0x1
Address: 1::A
Preferred lifetime 604800, valid lifetime 2592000
Expires at Dec 23 2010 13:47:52 (2588194 seconds left)
[Switch-Vlan-interface2] display ipv6 dhcp server ip-in-use address 1::B
Pool: 1
Client: FE80::18FE:31EF:EE49:0
Type: Static(C)
DUID: 00030001CA0006A40000
IAID: 0x1
Address: 1::B
Preferred lifetime 604800, valid lifetime 2592000
Expires at Dec 23 2010 13:47:52 (2588194 seconds left)
Dynamic IPv6 address assignment configurations example
Network requirements
As shown in
, the switch serves as the DHCPv6 server. It assigns IPv6 addresses on subnet
1:2::/32 to clients Host A and Host B, and assigns IPv6 addresses on subnet 1:3::/32 to clients Host C
and Host D.
Configuration considerations
Configure the following settings on the DHCPv6 server:
1.
Enable IPv6 and DHCPv6 server.
2.
Configure IPv6 address 1:2::1/32 for interface VLAN-interface 2 that connects to Host A and Host
B, and configure IPv6 address 1:3::1/32 for interface VLAN-interface 3 that connects to Host C
and Host D.
3.
Create DHCPv6 address pools, which contain subnets 1:2::/32 and 1:3::/32 respectively.
4.
Enable the DHCPv6 server on the interfaces that connect to the clients.
Figure 73 Network diagram
Configuration procedure
# Enable IPv6 and DHCPv6 server on the switch.